Step 1: Pick the camera type by application
| Application | Camera type | Key requirements | Recommended |
|---|---|---|---|
| Front ADAS (FCW/LDW/AEB) | Front-view camera | 120dB HDR, LFM, high MTF | Front ADAS camera module |
| Driver monitoring | In-cabin IR camera | Global shutter, 940nm IR, HDR | DMS/BSD smart camera |
| Blind-spot / door-open alert | Wide-angle side-rear camera | Large FOV, IP6K9K, object classification | DMS/BSD smart camera |
| Surround view | 4× fisheye cameras | ≥190° FOV, frame sync, stitching | 360° AVM solution |
| Streaming rearview | Rear HD camera | Anti-glare, night vision, waterproof | 540° AVM / streaming mirror |
Step 2: Pick the image sensor by key parameters
- Resolution: 2MP minimum for warning functions; choose a large sensor like AR0820 for long-range / 8MP needs
- HDR: ≥120dB multi-frame HDR recommended for front view; watch fusion artifacts
- LFM: Mandatory when detecting PWM LED signals / brake lights (e.g. OX03C10, ISX031)
- Pixel size: Prefer large pixels (≥3.0μm or 1/1.7"-class) for low light
- Frame rate: 60fps for fast target tracking; mind the link bandwidth at 8MP@60fps
Step 3: Pick the serial interface by architecture
- GMSL2 (MAX9295A/9296A): 6Gbps, 15m-class, PoC — NXP/NVIDIA ecosystem
- FPD-Link III (DS90UB953/954): 4.16Gbps, 10m-class — native on TI TDA4
- MIPI CSI-2: Short-reach (<30cm) board-level interconnect only
See the GMSL2 vs FPD-Link III comparison and the GMSL2 transport solution.
Typical configuration combos
| Scenario | Recommended combo |
|---|---|
| L2 front warning | 2MP (OX03C10-class) + GMSL2 + HFOV 52°/100° lens |
| 8MP long-range sensing | AR0820 + GMSL2@6Gbps + large lens + 60fps |
| In-cabin DMS | IR global-shutter sensor + 940nm illumination + GMSL2/USB |
| 4-channel AVM | 4× fisheye 720P + FH8333/S32V234 + one-shot calibration |
After selection
Once the direction is set, contact TSIMSAFE with your target platform/domain controller, feature list, annual volume and cost target — we return a selection proposal and pricing within 1 business day.
This guide is maintained by the TSIMSAFE R&D team; parameters are industry-typical values. Final selection should follow device datasheets and joint review conclusions.
Need one-on-one selection support?
TSIMSAFE engineers help evaluate and issue a selection proposal with samples.